Spartan Chemical Company, Inc.
Material Safety Data Sheet
Hide details for SECTION I: PRODUCT INFORMATIONSECTION I: PRODUCT INFORMATION

Product Name or Number (as it appears on label):Product Division:
CLOTHESLINE FRESH IODINE & BETADINE REMOVER [S5]
Product Number: 7055
Janitorial
Spartan Chemical Company, Inc.
Product/Technical Information:
 1-(800)-537-8990
1110 Spartan Drive
Medical Emergency:
 1-(888)-314-6171 (24 hours)
Maumee OH 43537
Chemical Leak/Spill Emergency:
 CHEMTREC 1-(800) 424-9300 (24 hours)
Shipping Description:
Non-Hazardous Products
NFPA Ratings:
HMIS Ratings:
Health:
1- Slight
Health:
*1 - Slight; Chronic Hazard
Fire:
0 - Minimal
Fire:
0 - Minimal
Reactivity:
0 - Minimal
Reactivity:
0 - Minimal
Pers. Prot. Equip.:
See Section VIII


Hide details for SECTION II: HAZARDOUS INGREDIENTSSECTION II: HAZARDOUS INGREDIENTS
(Listed when present at 1% or greater, carcinogens at 0.1% or greater) All component chemicals are listed or exempted from listing on the "TSCA Inventory" of chemical substances maintained by the U.S. Environmental Protection Agency.
Chemical Name(s)
% W
CAS Registry No.
Table Z- 1 - A
NTP, IARC or OSHA Carcinogen
TWA mg/m3
STEL mg/m 3
CELING mg/m3
Sodium thiosulfate pentahydrate
1-5
10102-17-7
Not Established
Not Established
Not Established
No
Sodium sulfite
< 1.0
7757-83-7
Not Established
Not Established
Not Established
No


Hide details for SECTION III: PHYSICAL DATASECTION III: PHYSICAL DATA
Boiling Point:
212 °F
Vapor Pressure:
Unknown
Vapor Density (AIR = 1):
Unknown
Solubility in Water:
Complete
pH:
9.0-9.5
Specific Gravity (H2O=1):
1.022
Evaporation Rate (but.ace.=1):
<1
Percent Solid by Weight:
1-5
Physical State:
Liquid
Appearance & Odor:
Clear liquid, mild odor.



Hide details for SECTION IV: FIRE & EXPLOSIVE HAZARD DATASECTION IV: FIRE & EXPLOSIVE HAZARD DATA

Flash Point:
> 212°F
Method Used:
ASTM-D56
Flammable Limits:
N/A
Flame Extension:
N/A
Extinguishing Media:
Product does not support combustion. Use extinguishing media appropriate for surrounding fire.
Special Fire Fighting Procedures:
Wear NIOSH approved self-contained breathing apparatus and protective clothing. Cool fire-exposed containers with water spray.
Unusual Fire & Explosive Hazards:
Burning may yield toxic sulfur dioxide gas. Combustion products are toxic.
Hide details for SECTION V: HEALTH HAZARD DATASECTION V: HEALTH HAZARD DATA
Threshold Limit Value:
Not Established
Primary Routes of Entry:
Skin Contact, Eyes and Oral
Effects of Overexposure-
Conditions to Avoid:
May cause eye irritation: Symptoms may include pain, redness, swelling and tearing
May cause skin irritation: Symptoms may include pain, redness and swelling.
May be harmful if swallowed: Symptoms may include nausea, vomiting, pain and diarrhea.
Inhalation of product mist may cause respiratory irritation: Symptoms may include nasal discomfort and coughing. Contains sodium sulfite which can cause allergic skin and respiratory reactions. Sulfite sensitive individuals and people with asthma may experience severe reactions from exposure to this product. Avoid contact with eyes, skin or clothing that is being worn. Do not taste or swallow. Avoid breathing product mist. Wash thoroughly after handling.
Conditions Aggravated by Use:
Use of this product may aggravate preexisting skin; eye and respiratory disorders including asthma and dermatitis.
Emergency & First Aid Procedures:
Eyes:
Flush eyes with water for at least 15 minutes. Remove contact lenses. Get medical attention.
Skin:
Remove contaminated clothing. Wash skin thoroughly with soap and water. Get medical attention if irritation persists. Wash contaminated clothing before reuse
Ingestion:
Do not induce vomiting. Drink one or two glasses of water to dilute product. Get medical attention. Never give anything by mouth to an unconscious person.
Inhalation:
In case of respiratory irritation or dizziness; move person to fresh air. Get medical attention if irritation persists.


Hide details for SECTION VI: REACTIVITY DATASECTION VI: REACTIVITY DATA

Stability:
Stable
Incompatible Materials:
Strong oxidizers. Reacts with acids to form toxic & irritating sulfur dioxide gas and/or hydrogen sulfide gas.
Hazardous Decomposition Products:
Thermal decomposition may produce oxides of sulfur, carbon and nitrogen as well as other toxic decomposition products.
Hazardous Polymerization:
Will Not Occur


Hide details for SECTION VII: SPILL OR LEAK PROCEDURESSECTION VII: SPILL OR LEAK PROCEDURES
Steps to be Taken in Case
Material is Released or Spilled:
Small spills of one gallon or less may be flushed with plenty of water to sanitary sewer system (If permitted by local sewer regulations). Dike and contain large spills with inert material and transfer liquid to containers for recovery or disposal. Keep spill out of storm sewers and waterways.
Waste Disposal Method:
Dispose of in compliance with all federal, state and local laws and regulations.


Show details for SECTION VIII: SPECIAL PROTECTION INFORMATIONSECTION VIII: SPECIAL PROTECTION INFORMATION
Hide details for SECTION IX: SPECIAL PRECAUTIONSSECTION IX: SPECIAL PRECAUTIONS

Precautions; Handling & Storing:
Keep out of reach of children.
Other Precautions:
Avoid contact with acids. Wash thoroughly with soap and water after handling.

© SCC 12/04/2008Name:Ronald T. CookTitle:Manager, Regulatory Affairs
CLOTHESLINE FRESH IODINE & BETADINE REMOVER [S5]Effective Date:12/04/2008
Ref: 29 CFR 1910.1200 (OSHA)Changes:New Product
This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty, express or implied, as to the accuracy of the information contained herein. Actual conditions of use and handling are beyond sellers control. User is responsible to evaluate all available information when using product for any particular use and to comply with all Federal, State and Local laws and regulations.