Spartan Chemical Company, Inc.
Material Safety Data Sheet
Hide details for SECTION I: PRODUCT INFORMATIONSECTION I: PRODUCT INFORMATION

Product Name or Number (as it appears on label):Product Division:
ANTIFOAM HP
Product Number: 2912 (Quarts);
2900 (Gallons & Five gallon pails)
IPG
Spartan Chemical Company, Inc.
Product/Technical Information:
 1-(800)-537-8990
1110 Spartan Drive
Medical Emergency:
 1-(888)-314-6171 (24 hours)
Maumee OH 43537
Chemical Leak/Spill Emergency:
 CHEMTREC 1-(800) 424-9300 (24 hours)
Shipping Description:
Cleaning compounds, liquid, n.o.s.
NFPA Ratings:
HMIS Ratings:
Health:
1- Slight
Health:
1- Slight
Fire:
0 - Minimal
Fire:
0 - Minimal
Reactivity:
0 - Minimal
Reactivity:
0 - Minimal
Pers. Prot. Equip.:
See Section VIII


Hide details for SECTION II: HAZARDOUS INGREDIENTSSECTION II: HAZARDOUS INGREDIENTS
(Listed when present at 1% or greater, carcinogens at 0.1% or greater) All component chemicals are listed or exempted from listing on the "TSCA Inventory" of chemical substances maintained by the U.S. Environmental Protection Agency.
Chemical Name(s)
% W
CAS Registry No.
Table Z- 1 - A
NTP, IARC or OSHA Carcinogen
TWA mg/m3
STEL mg/m 3
CELING mg/m3
Polysiloxane antifoam
40-60
Proprietary
Not Established
Not Established
Not Established
No


Hide details for SECTION III: PHYSICAL DATASECTION III: PHYSICAL DATA
Boiling Point:
210 °F
Vapor Pressure:
Unknown
Vapor Density (AIR = 1):
Unknown
Solubility in Water:
Dispersible
pH:
8.0-9.0
Specific Gravity (H2O=1):
1.05
Evaporation Rate (but.ace.=1):
< 1
Percent Solid by Weight:
40-60
Physical State:
Liquid
Appearance & Odor:
Off-white opaque liquid, mild odor



Hide details for SECTION IV: FIRE & EXPLOSIVE HAZARD DATASECTION IV: FIRE & EXPLOSIVE HAZARD DATA

Flash Point:
> 212°F
Method Used:
ASTM-D56
Flammable Limits:
Not Established
Flame Extension:
N/A
Extinguishing Media:
Product does not support combustion. Use extinguishing media appropriate for surrounding fire.
Special Fire Fighting Procedures:
Wear NIOSH approved self-contained breathing apparatus and protective clothing. Cool fire-exposed containers with water spray.
Unusual Fire & Explosive Hazards:
Combustion products are toxic.
Hide details for SECTION V: HEALTH HAZARD DATASECTION V: HEALTH HAZARD DATA
Threshold Limit Value:
Not Established
Primary Routes of Entry:
Inhalation, Skin Contact, Eyes, Oral
Effects of Overexposure-
Conditions to Avoid:
May cause skin and eye irritation: Symptoms may include pain, redness and tearing.
May be harmful if swallowed: Symptoms may include stomach or intestinal upset.
Inhalation of product mist may cause respiratory irritation: Symptoms may include irritation to nose, throat and airways.
Do not get in eyes, on skin or clothing. Do not swallow. Do not taste or swallow. Avoid breathing product mist. Wash thoroughly after handling.
Conditions Aggravated by Use:
Use of this product may aggravate preexisting skin; eye and respiratory disorders including asthma and dermatitis.
Emergency & First Aid Procedures:
Eyes:
Flush eyes with water for at least 15 minutes. remove contact lenses. Get medical attention if irritation persists.
Skin:
Remove contaminated clothing. Wash skin thoroughly with soap and water. Get medical attention if irritation persists. Wash contaminated clothing before reuse.
Ingestion:
Do not induce vomiting. Drink one or two glasses of water to dilute product. Get medical attention. Do not give anything by mouth to an unconscious person.
Inhalation:
Move person to fresh air. Get medical attention if irritation persists.


Hide details for SECTION VI: REACTIVITY DATASECTION VI: REACTIVITY DATA

Stability:
Stable
Incompatible Materials:
Strong oxidizing materials
Hazardous Decomposition Products:
Unknown
Hazardous Polymerization:
Will Not Occur


Hide details for SECTION VII: SPILL OR LEAK PROCEDURESSECTION VII: SPILL OR LEAK PROCEDURES
Steps to be Taken in Case
Material is Released or Spilled:
Dike and contain spill with inert material (sand, earth, commercial absorbent, etc.) and transfer to containers for disposal. Keep spill out of storm sewers and waterways.
Waste Disposal Method:
Consult an expert on disposal of recovered material and ensure conformity with federal, state and local regulations.


Hide details for SECTION VIII: SPECIAL PROTECTION INFORMATIONSECTION VIII: SPECIAL PROTECTION INFORMATION

Respiratory Protection:
None required
Ventilation:
Good general ventilation should be sufficient for most conditions. Local exhaust ventilation may be necessary for some operations.
Protective Gloves(Specify Type):
Rubber or other impervious gloves are recommended.
Eye Protection(Specify Type):
Splash goggles are recommended to prevent eye contact.
Other Protective Equipment:
For further guidance see 29 CFR 1910.132-138.



Hide details for SECTION IX: SPECIAL PRECAUTIONSSECTION IX: SPECIAL PRECAUTIONS

Precautions; Handling & Storing:
Store in a cool dry place away from strong oxidizers and extreme heat. Keep containers sealed and stored upright when not in use.
Other Precautions:
Keep out of reach of children.

© SCC 09/22/2008Name:Ronald T. CookTitle:Manager, Regulatory Affairs
ANTIFOAM HPEffective Date:09/22/2008Supercedes:11/30/2005
Ref: 29 CFR 1910.1200 (OSHA)Changes:Review
This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty, express or implied, as to the accuracy of the information contained herein. Actual conditions of use and handling are beyond sellers control. User is responsible to evaluate all available information when using product for any particular use and to comply with all Federal, State and Local laws and regulations.